The EV Series electric actuators offer a simple and cost effective solution for your valve automation needs. For use on quarter turn (90°) ball valves 1/4" to 1" in size. This compact industrial unit has external wire leads eliminating the need to open the unit. Pre-wired power cords are also available.

Features

•   Captive cover bolt. Prevents loss when cover is removed for adjustments.
•   Manual override. Stainless Steel with wrench flats for easy manual operation.
•   Fine adjust cams allowing 90° to 270° operation.
•   Potted leads.
•   NEMA-4/4X housing design for superior corrosion resistance.
•   Ball bearing support providing greater reliability.
•   Heavy duty PSC motor with automatically re-setting thermal protector to prevent overheating.
•   High strength gears designed to AGMA standards and able to withstand stall torque conditions.
•   15 A SPDT switches.
•   Permanently lubricated gear train.
•   ISO 5211 mounting pad.
•   1/2" conduit entry, optional additional entry.

Optional Features

• Modulating control board with digital calibration.
• Extra switches.  
• 3-position setup to close the valve to a slower flow rate, allowing top off.
• Terminal strips to provide a termination point inside of the housing.
• On-board relays, feedback sensors and timers.
• Heavy duty brake.Position indicator.
• Heater and thermostat to prevent condensation buildup and corrosion.
• Sealed leads to prevent moisture ingress.
• Battery backup.
• Control boxes for specific and custom functions.

Specifications

• Temperature Range:  -4 to +160°F ; -40 to +160°F (with heater)
• Enclosure: Nema-4, weatherproof
• Electrical Connection: 1/2" NPT conduit (female) with wire leads
• Duty Cycle:
    AC 125 in./lb. Units: 25%
    AC 300 in./lb. Units: 75%
    DC Units: 100%